1-866-752-2522
425-747-1157

Contact Us Today







Over 3.3 Million Pounds of Concrete Saved Annually!

Polyurethane Concrete Raising

Polyurethane concrete raising achieves the same results as traditional mudjacking with a lightweight material that requires smaller and fewer injection holes.

This process is a cost-effective alternative to replacing concrete and can usually be done for less than half the cost of pouring new concrete. However, the savings may be even greater since when concrete raising, the costs of demolition, removal, and landscaping are eliminated.

Most projects can be completed quickly and economically with minimal disruption, and are ready for use the same day. Whether you have a project for a Plant floor, municipal roadway, highway or with warehouse floor raising and leveling, we are specialists in large commercial applications.

The equipment is contained in a truck or trailer, and has a sufficient length of hose to accommodate your needs. The equipment remains parked while the polyurethane crew pulls out enough hose to reach the area being repaired. Polyurethane foam, a high density material, is injected under the slab filling voids and raising it to the correct level.

After the injection is completed the hole is patched with cement. The concrete slab is ready for use immediately.

Customers can still access your main entrance as our very courteous crew will make sure traffic flow is not interrupted.

Most jobs can be done in one day, large jobs may take longer, and your operations can continue while we work. Typically 1-866-SLABJACK can work around your stock or machinery, working with your schedule. Experienced crews have knowledge of the unique climate and soils throughout the Pacific Northwest region for polyurethane concrete raising in Boise, Spokane, Seattle, and Portland.

Mudjacking vs. Polyurethane: The Difference

What is the difference between Mudjacking and Polyurethane Concrete Raising?

Both methods achieve the same results:
Raise and Support sunken or unstable concrete slabs by drilling holes and pumping material under the slab.

Material

Settled concrete is commonly a result of poor soil conditions bellow a slab. Because of this Polyurethane has become a popular repair method because the high density material is so lightweight it will not further burden the already weak soil.

Mudjacking uses a sand based material that is infused with portland cement. This slurry is hydraulically pumped under the slab to fill voids and raise the concrete. Mudjacking material weighs on average 100 lbs per cubic foot.

Polyurethane Concrete Raising uses a foam material that is injected under the slab. When the components of this material are mixed a reaction causes the material to expand. This expanded foam fills any voids and raises concrete. This material will never lose density. After it is installed it is permanent and weighs about 2 lbs per cubic foot.

Holes

After the concrete has been raised the only visible evidence that the slab has been repaired is the holes. For this reason Polyurethane has gained HUGE popularity because of the nearly invisible 5/8" holes that remain after the job is completed.

Mudjacking involves drilling a series of 1" holes in a slab of concrete so the material can be pumped under the settled slab.

Polyurethane Concrete Raising drills a nearly invisible 5/8" hole and the process calls for considerably fewer holes than traditional mudjacking.

Non-Residential

1-866-SLABJACK Concrete Lifting goes far beyond residential services. 1-866-SLABJACK offers both mudjacking and polyurethane concrete raising solutions for large scale projects. With an extensive list of clientele 1-866-SLABJACK has worked in almost every state in the continental US. As a prime or subcontractor 1-866-SLABJACK has the capacity for large scale concrete raising and stabilization projects.

With traditional mudjacking or polyurethane projects 1-866-SLABJACK has the solution for your specific project needs.

Commercial Services

Now Providing Traditional Mudjacking AND Polyurethane Concrete Raising and Void Filing.

ATTENTION: Plant Managers, Warehouse Management, Purchasing Agents, Safety Coordinators and General Contractors.

Do you have a concrete slab that has failed?

1-866-SLABJACK can repair a concrete slab to help maintain a safer environment for workers and cut down on lost time due to spills or accidents caused by an uneven concrete slab. We have experience working throughout the Pacific Northwest including Spokane, Seattle, Boise and Portland, OR.

Concrete lifting can avoid the down time of removing and replacing, and can repair your concrete slab without interfering with your daily operation. We are warehouse floor raising and leveling specialists.

Providing traditional mudjacking concrete raising and the newest industry methods available, 1-866-SLABJACK is now offering High Density Polyurethane concrete raising and void filling.

This foam material urethane is the newest material being utilized in the concrete raising industry and 1-866-SLABJACK is proud to be the leading the way!

Void and Crack Filling

Lightweight material, fewer holes, and smaller holes give polyurethane a clear advantage over mudjacking material. Perfect for joint stabilization this material travels along a void filing and stabilizing the concrete to avoid vibrations and rocking.

High Density material is a lightweight material. It is injected as a liquid and sets up into a foam material. After 15 seconds it will reach its final volume, after curing it will never lose its density. This material is vulnerable to sunlight which can damage the material structure. With the application being under concrete it is not exposed to sunlight therefore never losing density.

The polyurethane equipment is contained in a truck or trailer, and has a sufficient length of hose to accommodate your needs.

The process of void filling and raising a concrete slab is the same as traditional mudjacking. Polyurethane expands versus the pressure of pumping in traditional mudjacking material.

Because of the characteristics of the material and how it is delivered, polyurethane can cover a larger area in less time.

1-866-SLABJACK Polyurethane Materials

To learn more about 1-866-SLABJACK High Density Polyurethane please call 866-752-2522.

1-866-SLABJACK has a variety of Polyurethane Materials for different applications. Designed specifically for large slabs, small slabs, void fills, and soil stabilization 1-866-SLABJACK materials react and expand differently for the desired end result.

1-866-SLABJACK has become a premier provider for polyurethane concrete lifting and void filling. No job is too big for the professionals!

Municipal Services

1-866-SLABJACK has worked for many different Municipalities in the Northwest in different capacities including Boise, Portland, Seattle and Spokane.

Whether hired individually by residents to raise sections of concrete or executing an entire sidewalk contract, 1-866-SLABJCK has been serving our local municipalities several years.

Types of Projects:

  • Bridge Approach
  • Raise and Stabilize Roadway Slabs
  • Highway Slabs and Sections
  • City Sidewalk Projects

Through both mudjacking and polyurethane concrete raising, 1-866-SLABJACK has the solution for your project.

Polyurethane Concrete Raising & Void Filling

Lightweight material, fewer holes, and smaller holes give polyurethane a clear advantage over mudjacking material. Perfect for joint stabilization this material travels along a void filing and stabilizing the concrete to avoid vibrations and rocking.

High Density Polyurethane material is a lightweight material. It is injected as a liquid and sets up into a foam material. After 15 seconds it will reach its final volume, after curing it will never lose its density. This material is vulnerable to sunlight which can damage the material structure. With the application being under concrete it is not exposed to sunlight therefore never losing density.

The polyurethane equipment is contained in a truck or trailer, and has a sufficient length of hose to accommodate your needs.

The process of void filling and raising a concrete slab is the same as traditional mudjacking. Polyurethane expands versus the pressure of pumping in traditional mudjacking material.

Because of the characteristics of the material and how it is delivered, polyurethane can cover a larger area in less time.

1-866-SLABJACK Polyurethane Materials

To learn more about 1-866-SLABJACK High Density Polyurethane please call 866-752-2522.

1-866-SLABJACK has a variety of Polyurethane Materials for different applications. Designed specifically for large slabs, small slabs, void fills, and soil stabilization 1-866-SLABJACK materials react and expand differently for the desired end result.

1-866-SLABJACK has become a premier provider for polyurethane concrete lifting and void filling. No job is too big for the professionals!